The City of Burleson requires a permit for storage buildings.
Requirements are as follows:
Provide street address
Note location of adjacent street(s)
Identify primary structure
Provide dimensions of proposed accessory structure
Note location and width of any utility easements
Note location of any other accessory structures, including swimming pools
Note setbacks from property lines and adjacent structure(s)
Minimum setbacks are as follows:
Rear: May abut, but not encroach into utility easement. If there is no rear yard easement, minimum rear setback is (3') three feet.
Side (interior lot lines): May abut, but not encroach into utility easement. If there is no side yard easement, minimum side setback is (3') three feet
Side (adjacent to side street): Structure must be set back at least 10 feet from a side property line adjacent to a side street. If a platted building line greater than 10 feet is in place, structure must be located at, or behind platted line.
Separation between primary and accessory structures: Separation between these structures must be at least 10 feet.
Permits may be purchased at City Hall in the Building Permits and Inspections Department. Call 817-426-9632 for more information.